ГОСТ 11ΧΦEnquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | 11ΧΦ | ГОСТ | Russia |
Chemical composition%of the ladle analysis of grade11ΧΦ
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
1.05-1.15 | 0.15-0.35 | 0.40-0.70 | ≤0.030 | ≤0.030 | 0.40-0.70 | ≤0.35 | ≤0.20 | 0.15-0.30 | ≤0.20 | ≤0.30 | ≤0.03 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
612(≥) | 434(≥) | 43 | 14 | 43 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 232 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
837(≥) | 825(≥) | 23 | 44 | 23 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 312 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
117 | 357 | 929 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
F10011 | ГОСТ | Russia | Used in the products of the automobile, truck, tractor, and allied industries |
00Cr17Ni14Mo2 | ГОСТ | Russia | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
X2CrNiMo18-14-3 | ГОСТ | Russia | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
1.4435 | ГОСТ | Russia | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
Z 3 CND 17-11-02 | ГОСТ | Russia | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
TS 60 | ГОСТ | Russia | Austenitic stainless steel. Grade 00Cr17Ni14Mo2 was replaced by new designation 022Cr17Ni12Mo2 according to GB/T 20878 (2007) |
0Cr18Ni11Nb | ГОСТ | Russia | Heavy stainless acid resistant and heat resistant steel forgings |
1Cr18Ni11SiA1Ti | ГОСТ | Russia | Stainless steel bars |
11Cr17 | ГОСТ | Russia | Stainless steel bars |
Y11Cr17 | ГОСТ | Russia | Stainless steel bars |
0Cr11Ti | ГОСТ | Russia | Heat-resisting steel sheets and plates |
1Cr11MoV | ГОСТ | Russia | Steels of blade for steam turbine |
1Cr11Ni2W2MoV | ГОСТ | Russia | Heat-resisting steel bars |
GH1131 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH1140 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH1138 | ГОСТ | Russia | Iron-based superalloy |
GH1139 | ГОСТ | Russia | Iron-based superalloy |
GH1167 | ГОСТ | Russia | Iron-based superalloy |
GH4118 | ГОСТ | Russia | Iron-based superalloy |
A 182 F XM-11 | ГОСТ | Russia | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
Relevant products
SKD-11 Cold working die steel
X165CrMoV12 Cold working die steel
Incoloy800 round bar
X19CrMoVNbN11-1 / 1.4913 Disc Forging
1.2343(H11/X38CrMoV5/Z38CDV5) ESR HOT-WORK STEEL
SKD11(D2, 1.2379, X153CrMo12) Cold Work Tool Steel
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Forged Bars
21CMoV5-7,1.7709,21CRMOV5-11,1.8070 Forgings
1.2581(H21, X30WCrV93, SKD5) Hot-Work Mould Steel
11ΧΦ Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
SkD-11 Round Bar Stock | Φ30-Φ350 | Round Bar | Kgs | 3102 | Hot-Rolled+Annealed+black | Enquiry |
Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
Incoloy800 round bar | Φ115*1400 | Round Bar | Kgs | 169 | Hot-Rolled+Annealed+black | Enquiry |
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry |