ASTM A3Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | A3 | ASTM | USA |
Chemical composition%of the ladle analysis of gradeA3
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Mo(％) | V(%) |
|---|---|---|---|---|---|---|---|
| 1.20～1.30 | 0.10～0.50 | 0.40～0.60 | ≤0.030 | ≤0.030 | 4.75～5.50 | 0.90～1.40 | 0.80～1.40 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 213(≥) | 652(≥) | 23 | 14 | 44 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 442 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 543(≥) | 985(≥) | 24 | 23 | 22 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 114 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 294 | 859 | 491 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| RA 330 | ASTM | USA | Wrought nickel and nickel-related alloys |
| RA 330 | ASTM | USA | Special Purpose Alloys ("Superalloys") |
| RA 330 | ASTM | USA | Wrought Nickel and Nickel-Related Alloys |
| RA 333 | ASTM | USA | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated |
| RA 333 | ASTM | USA | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated |
| RA 333 | ASTM | USA | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated |
| RA 333 | ASTM | USA | Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated |
| RA 333 | ASTM | USA | Special Purpose Alloys ("Superalloys") |
| RA 333 | ASTM | USA | Wrought nickel and nickel-related alloys |
| NA3 | ASTM | USA | Specification for nickel-copper alloy castings |
| NA32 | ASTM | USA | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA34 | ASTM | USA | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA35 | ASTM | USA | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA36 | ASTM | USA | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| NA37 | ASTM | USA | Filler rods and wires for gas-shielded arc welding; Nickel and nickel alloys |
| NA38 | ASTM | USA | Filler rods and wires for gas-shielded arc welding; Nickel and nickel alloys |
| NA39 | ASTM | USA | Filler rods and wires for gas-shielded arc weldingSpecification for nickel and nickel alloys |
| A3 | ASTM | USA | Cold-Work Tool Steel |
| 403CB+, H46, B50A365, S40300, B50A365B,403 | ASTM | USA | STAINLESS STEEL BAR & FORGINGS,CHROMIUM-NIOBIUM-IRON ALLOY |
Relevant products
A3 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| A387 F5 & Grade 5 sheet Coil strip | 0.5mmx200mmxC | Coil or Strip | Tons | 3 | Cold-Rolled+Annealed | Enquiry |
| A387 F5 & Grade 5 Hot Coil stock | Select | Tons | 3 | Hot-Rolled+Annealed+black | Enquiry |