AFNOR X5CrNiCuNb16-4Enquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | X5CrNiCuNb16-4 | AFNOR | France |
Chemical composition%of the ladle analysis of gradeX5CrNiCuNb16-4
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | Cu(%) | Nb(%) |
---|---|---|---|---|---|---|---|---|---|
Max 0.07 | Max 0.70 | Max 1.50 | Max 0.040 | Max 0.015 | 15.00-17.00 | 3.00-5.00 | Max 0.60 | 3.00-5.00 | 5xC-0.45 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
837(≥) | 756(≥) | 43 | 43 | 42 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 334 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
862(≥) | 462(≥) | 31 | 44 | 32 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 213 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
664 | 335 | 762 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
X5CrNiCuNb16-4 | AFNOR | France | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
1.4542 | AFNOR | France | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
X5CrNiCuNb16-4 | AFNOR | France | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
1.4542 | AFNOR | France | Open die steel forgings for general engineering purposes - Part 4: Stainless steels |
X5CrNiCuNb16-4 | AFNOR | France | Stainless steels - Chemical composition |
17-4PH, 1.4542, X5CrNiCuNb16-4 | AFNOR | France | Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4) |