AS 316Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | 316 | AS | Australia |
Chemical composition%of the ladle analysis of grade316
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Mo(％) | N(%) |
|---|---|---|---|---|---|---|---|---|
| 0.08 | 0.75 | 2.00 | 0.045 | 0.030 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | Max 0.10 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 898(≥) | 626(≥) | 14 | 21 | 33 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 121 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 831(≥) | 138(≥) | 43 | 43 | 13 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 141 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 157 | 933 | 953 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 316 | AS | Australia | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| 316 | AS | Australia | Austenitic Chromium Nickel Heat Resisting Steel |
| 316 | AS | Australia | Austenitic Chromium Nickel Heat Resisting Steel |
| A 167 Type 316 | AS | Australia | Stainless and heat resisting chromium-nickel steel plate, sheet and strip |
| A 182 F 316 | AS | Australia | Forged low alloy and stainless steel piping components for use in pressure |
| 316 | AS | Australia | Pipe, corrosion-resistant, stainless steel, seamless or welded |
| A 240 S31600 | AS | Australia | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 249 S31600 | AS | Australia | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| A 269 S31600 | AS | Australia | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
| A 270 S31600 | AS | Australia | Seamless and Welded Austenitic Stainless Steel Sanitary Tubing |
| A 276 S31600 | AS | Australia | Stainless Steel Bars and Shapes |
| A 312 S31600 | AS | Australia | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| A 313 S31600 | AS | Australia | Stainless Steel Spring Wire |
| A 314 S31600 | AS | Australia | Stainless Steel Billets and Bars for Forging |
| A 358 S31600 | AS | Australia | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
| A 368 S31600 | AS | Australia | Stainless Steel Wire Strand |
| A 409 S31600 | AS | Australia | Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service |
| A 473 S31600 | AS | Australia | Stainless Steel Forgings |
| A 478 S31600 | AS | Australia | Chromium-Nickel Stainless Steel Weaving and Knitting Wire |
| A 492 S31600 | AS | Australia | Stainless Steel Rope Wire |
