NiCr20Ti Enquiry | Print this page
ISO NiCr20Ti Details
ISO NiCr20Ti Standard Download
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Superalloys | NiCr20Ti | International - ISO , ISO 6207 (1992) - Seamless nickel and nickel alloy tube ISO 6208 (1992) - Nickel and nickel alloy plate, sheet and strip ISO 9722 (1992) - Nickel and nickel alloys - Composition and forms of wrought products ISO 9723 (1992) - Nickel and nickel alloy bars ISO 9724 (1992) - Nickel and nickel alloy wire and drawing stock ISO 9725 (1992) - Nickel and nickel alloy forgings |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.08 | 0.15 | ||
| Si | - | 1.00 | ||
| Mn | - | 1.00 | ||
| P | - | - | ||
| S | - | 0.020 | ||
| Cr | 18.00 | 21.00 | ||
| Ni | remaining | - | ||
| Co | - | 5.00 | ||
| Fe | - | 5.00 | ||
| Ti | 0.20 | 0.60 | ||
| Cu | - | 0.50 |
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 972 (≥) | 465 (≥) | 41 | 41 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 232 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 998 (≥) | 997 (≥) | 42 | 24 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 414 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 263 | 717 | 688 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| NiCr20Ti | B.S. | UK | Heat resisting steels and nickel alloys |
| 2.4951 | B.S. | UK | Heat resisting steels and nickel alloys |
| NiCr20TiAI | AFNOR | France | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| NiCr20Ti | ISO | International | Nickel and nickel alloy forgings |
| NiCr20TiAl | ISO | International | Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines |
| NC20T, NiCr20Ti, N06075, 2.4951, NiCr20Ti | AFNOR | France | Nickel and nickel alloy forgings |
