A 358 S32109 Enquiry | Print this page
SAE A 358 S32109 Details
SAE A 358 S32109 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | A 358 S32109 | Austenite | USA - SAE , A 358/A 358M (2008) - Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.04 | 0.10 | ||
Mn | - | 2.00 | ||
Si | - | 1.00 | ||
P | - | 0.04 | ||
S | - | 0.03 | ||
Cr | 17.00 | 20.00 | ||
Ni | 9.00 | 12.00 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
688 (≥) | 611 (≥) | 11 | 23 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 323 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
723 (≥) | 922 (≥) | 24 | 22 | 21 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
678 | 272 | 795 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S32109 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S32109 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 358 S32109 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A 813 S32109 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
A 814 S32109 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
A 965 S32109 | SAE | USA | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
S32109 | AISI | USA | Austenitic Chromium Nickel Stainless Steel (Titanium Stabilized, High carbon) |
SA-240 S32109 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-403 S32109 | AMS | USA | Specification for Wrought Austenitic Stainless Steel Piping Fittings |
SA-813 S32109 | AMS | USA | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
SA-814 S32109 | AMS | USA | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
SA-965 S32109 | AMS | USA | Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
SUS 321HFB | JIS | Japan | Stainless steel blooms and billets for forgings |
SUS 321HTP | JIS | Japan | Stainless steel pipes |
STSF321H | KS | Korea | Stainless steel forgings for pressure vessels |