A 554 S43400 Enquiry | Print this page
SAE A 554 S43400 Details
SAE A 554 S43400 Standard Download
| Category | Type | Grade | Microstructure | Designations |
|---|---|---|---|---|
| Grades | Stainless Steels | A 554 S43400 | Ferrite | USA - SAE , A 554 (2011) - Welded Stainless Steel Mechanical Tubing |
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.12 | ||
| Mn | - | 1.00 | ||
| Si | - | 1.00 | ||
| P | - | 0.04 | ||
| S | - | 0.03 | ||
| Cr | 16.00 | 18.00 | ||
| Ni | - | - | ||
| Mo | 0.75 | 1.25 |
Welded Stainless Steel Mechanical Tubing
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 788 (≥) | 575 (≥) | 12 | 41 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 432 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 819 (≥) | 857 (≥) | 43 | 23 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 443 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 946 | 343 | 358 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| A 240 S43400 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| A 554 S43400 | SAE | USA | Welded Stainless Steel Mechanical Tubing |
| S43400 | AISI | USA | Ferritic Chromium Molybdenum Stainless Steel |
| SA-240 S43400 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| SUS 434 | JIS | Japan | Stainless steel bars |
| SUS 434 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
| SUS 434 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
| SUS 434 | JIS | Japan | Stainless steel wire rods |
| SUS 434-WSB | JIS | Japan | Stainless steel wires for cold heading and cold forging |
| 434S17 | B.S. | UK | Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip |
| 434S20 | B.S. | UK | Specification for stainless and heat-resisting steel round wire |
| STS434 | KS | Korea | Stainless steel bars |
| STS434WSB | KS | Korea | Stainless steel wires for cold heading and cold forging |
| CNS 434 | CNS | China | Stainless steel wire rods |
