SA-240 S43400 Enquiry | Print this page
AMS SA-240 S43400 Details
AMS SA-240 S43400 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SA-240 S43400 | Ferrite | USA - AMS , SA-240/SA-240M - Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.12 | ||
Mn | - | 1.00 | ||
Si | - | 1.00 | ||
P | - | 0.04 | ||
S | - | 0.03 | ||
Cr | 16.00 | 18.00 | ||
Ni | - | - | ||
Mo | 0.75 | 1.25 |
Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
437 (≥) | 879 (≥) | 12 | 43 | 42 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
139 (≥) | 655 (≥) | 14 | 34 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 243 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
578 | 726 | 671 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S43400 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 554 S43400 | SAE | USA | Welded Stainless Steel Mechanical Tubing |
S43400 | AISI | USA | Ferritic Chromium Molybdenum Stainless Steel |
SA-240 S43400 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SUS 434 | JIS | Japan | Stainless steel bars |
SUS 434 | JIS | Japan | Hot-rolled stainless steel plates, sheet and strip |
SUS 434 | JIS | Japan | Cold-rolled stainless steel plate, sheet and strip |
SUS 434 | JIS | Japan | Stainless steel wire rods |
SUS 434-WSB | JIS | Japan | Stainless steel wires for cold heading and cold forging |
434S17 | B.S. | UK | Steel plate, sheet and strip. Specification for stainless and heat-resisting steel plate, sheet and strip |
434S20 | B.S. | UK | Specification for stainless and heat-resisting steel round wire |
STS434 | KS | Korea | Stainless steel bars |
STS434WSB | KS | Korea | Stainless steel wires for cold heading and cold forging |
CNS 434 | CNS | China | Stainless steel wire rods |