HP 9-4-30 Enquiry | Print this page
UNS HP 9-4-30 Details
UNS HP 9-4-30 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | HP 9-4-30 | Precipitation-Hardening | USA - UNS , SAE AMS 6524E (1991) - Steel, Sheet, Strip, and Plate 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Melted, Annealed |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.29 | 0.34 | ||
Si | - | 0.10 | ||
Mn | 0.10 | 0.35 | ||
Ni | 7.00 | 8.00 | ||
Cr | 0.90 | 1.10 | ||
Al | - | - | ||
Cu | - | - | ||
Ti | - | - | ||
Fe | - | - | ||
Mo | 0.90 | 1.10 | ||
Co | 4.25 | 4.75 | ||
V | 0.06 | 0.12 | ||
P | - | 0.01 | ||
S | - | 0.01 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
496 (≥) | 185 (≥) | 41 | 33 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 134 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
934 (≥) | 171 (≥) | 31 | 23 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 342 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
984 | 674 | 718 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 646 Grade HP 9-4-20 | SAE | USA | Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
HP 9-4-20 | ASTM | USA | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
HP 9-4-20 | ASTM | USA | Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted |
HP 9-4-20 | UNS | USA | Steel, Sheet, Strip, and Plate 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum Consumable Electrode Melted, Annealed |
HP 9-4-20 | AMS | USA | Steel, Bars, Forgings, Tubing, and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted |
HP 9-4-25 | ASTM | USA | Steel Sheet, Strip, and Plate 0,48Cr - 8,0Ni - 4,0Co - 4,48Mo - 0,09V - (0,24 - 0,30C) Consumable Electrode Melted, Annealed |
HP 9-4-25 | UNS | USA | Steel Sheet, Strip, and Plate 0,48Cr - 8,0Ni - 4,0Co - 4,48Mo - 0,09V - (0,24 - 0,30C) Consumable Electrode Melted, Annealed |
A 646 Grade HP 9-4-30 | SAE | USA | Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings |
HP 9-4-30 | ASTM | USA | Steel, Sheet, Strip, and Plate 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Melted, Annealed |
HP 9-4-30 | ASTM | USA | Steel, Bars, Forgings, Tubing, and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed |
HP 9-4-30 | UNS | USA | Steel, Sheet, Strip, and Plate 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Melted, Annealed |
HP 9-4-30 | UNS | USA | Steel, Bars, Forgings, Tubing, and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed |