Z6CNT18-10 Enquiry | Print this page
AFNOR Z6CNT18-10 Details
AFNOR Z6CNT18-10 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Stainless Steels | Z6CNT18-10 | France - AFNOR , NF A 35-578 - Iron and steel. Stainless steel for high temperature application NF A 35-573 - Stainless steels for general purposes. Plates, wide strips and strips NF A 36-607 - Austenitic stainless steel parts obtained by flat die forging or drop forging for boilers and pressure vessels. Grade and types NF A 35-559 - Iron and steel. Heat treatable special steels and stainless steels for externally threaded fasteners for use at low temperatures NF A 35-574 - Iron and steel. Stainless steel for general purposes. Semi- finished products, bars and wire rod NF A 36-209 - Iron and steel. Austenitic and austenic-ferritic stainless steels plates for boilers and pressure vessels NF E 29-043 - Non alloy and alloy steel bolting for pressure equipement - Specifications |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.060 | ||
Si | - | 0.75 | ||
Mn | - | 2.00 | ||
P | - | 0.040 | ||
S | - | 0.015 | ||
Cr | 17.00 | 19.00 | ||
Mo | - | - | ||
Ni | 9.00 | 12.00 | ||
Ti | 5(C+N) | 0.70 |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
344 (≥) | 129 (≥) | 11 | 31 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 341 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
694 (≥) | 833 (≥) | 12 | 34 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 231 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
456 | 138 | 791 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
Z6CNT18-10 | AFNOR | France | Non alloy and alloy steel bolting for pressure equipement - Specifications |
Z6CNT18-10B | AFNOR | France | Iron and steel. Stainless steel for high temperature application |
Z6CNT18-10F | AFNOR | France | General purpose forgings. Stainless steels |
TUZ6CNT18-10 | AFNOR | France | Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions |
TSZ6CNT18-10 | AFNOR | France | Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions |