TUZ6CNT18-10 Enquiry | Print this page
AFNOR TUZ6CNT18-10 Details
AFNOR TUZ6CNT18-10 Standard Download
TUZ6CNT18-10 Application:Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions
| Category | Type | Grade | Designations |
|---|---|---|---|
| Grades | Stainless Steels | TUZ6CNT18-10 | France - AFNOR , NF A 49-117 - Steel tubes. Seamless plain end tubes for pipes-lines and other uses. Ferritic and austenitic stainless steels. Dimensions. Technical delivery conditions NF A 49-217 - Steel tubes. Seamless tubes for heat exchangers. Stainless ferritic, austenic or ferritoaustenitic steel grades. Dimensions. Technical delivery conditions NF A 49-218 - Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions |
Chemical composition(wt.%) of TUZ6CNT18-10 grade: NF A 49-117
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.060 | ||
| Si | - | 0.75 | ||
| Mn | - | 2.00 | ||
| P | - | 0.040 | ||
| S | - | 0.015 | ||
| Cr | 17.00 | 19.00 | ||
| Mo | - | - | ||
| Ni | 9.00 | 12.00 | ||
| Ti | 5(C+N) | 0.70 |
Mechanical properties of grade TUZ6CNT18-10 NF A 49-117
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 585 (≥) | 573 (≥) | 43 | 31 | 33 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 413 |
Physical properties of grade TUZ6CNT18-10 NF A 49-117
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 299 (≥) | 672 (≥) | 22 | 23 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 344 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 515 | 994 | 261 |
TUZ6CNT18-10 - Form of Supply
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Cross Reference Table(Equivalent Grade)
| Grade | Standard | Country | Application |
|---|---|---|---|
| Z6CNT18-10 | AFNOR | France | Non alloy and alloy steel bolting for pressure equipement - Specifications |
| Z6CNT18-10B | AFNOR | France | Iron and steel. Stainless steel for high temperature application |
| Z6CNT18-10F | AFNOR | France | General purpose forgings. Stainless steels |
| TUZ6CNT18-10 | AFNOR | France | Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions |
| TSZ6CNT18-10 | AFNOR | France | Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions |
Enquiry
* Required fields