X1Enquiry|Print this page
Category | Type | Steel grade | Country |
---|---|---|---|
Grades | Special Alloy | X1 | UK |
Chemical composition%of the ladle analysis of gradeX1
Co(%) | Other(%) |
---|---|
6.5 | TiC(%,):17, WC(%,):73.5, Ta(Nb)C(%,):3 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
759(≥) | 589(≥) | 33 | 42 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 111 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
535(≥) | 177(≥) | 11 | 44 | 24 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 114 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
894 | 779 | 383 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
X 19 CrMoNbVN 11-1 | UK | Stainless steels - Part 1: list of stainless steels | |
X 19 CrMoVNbN 11 1 | UK | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications | |
1.4913 | UK | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications | |
X12CrS13 | UK | Flat products made of steels for pressure purposes - Part 7: Stainless steels | |
1.4005 | UK | Flat products made of steels for pressure purposes - Part 7: Stainless steels | |
X12Cr13 | UK | Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm | |
1.4006 | UK | Steel FE-PM1901 (X12CrNi13) - 600 MPa <= Rm <= 800 MPa - Bars - De <= 70 mm | |
X15Cr13 | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | |
1.4024 | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | |
X17CrNi16-2 | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | |
1.4057 | UK | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes | |
X14CrMoS17 | UK | Stainless steels - Technical delivery conditions for drawn wire | |
1.4104 | UK | Stainless steels - Technical delivery conditions for drawn wire | |
X110CrMoV15 | UK | High alloyed CrMoV stainless steel | |
1.4111 | UK | High alloyed CrMoV stainless steel | |
X105CrMo17 | UK | Stainless steels - Part 3: Technical dStainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposeselivery conditions for semi-finishe | |
1.4125 | UK | Stainless steels - Part 3: Technical dStainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposeselivery conditions for semi-finishe | |
X10CrNi18-8 | UK | Stainless steels - Part 1: List of stainless steels | |
1.4310 | UK | Stainless steels - Part 1: List of stainless steels | |
X1CrNi25-21 | UK | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
Relevant products
SKD-11 Cold working die steel
X165CrMoV12 Cold working die steel
T30402/X155CrVMo121 Die Steel Sheet
X19CrMoVNbN11-1 / 1.4913 Disc Forging
SKD11(D2, 1.2379, X153CrMo12) Cold Work Tool Steel
Stainless Steel 446(1.4749, X18CrN28, UNS S44600) Tube Pipe
X105CrMo17 Extruded Pipe
X10CrWMoVNb9-2/P92/T92/F92 Boiler Tube Pipe
X10CrAlSi-13(1.4724) Seamless tube
D2(Cr12Mo1V1) Hot Rolled Plate
X12CrNiWTiB16-13, 1.4962 Flat Bar
X1 Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |