ISO ISO H11Enquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | ISO H11 | ISO | ISO |
Chemical composition%of the ladle analysis of gradeISO H11
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) | Ti(%) |
|---|---|---|---|---|---|---|---|
| Max 0.10 | Max 1.0 | Max 1.00 | Max 0.045 | Max 0.030 | 17.0-19.0 | 9.0-12.0 | 5x％C≤0.80 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 799(≥) | 294(≥) | 11 | 14 | 44 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 211 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 654(≥) | 291(≥) | 22 | 12 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 121 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 893 | 351 | 253 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| GH1131 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
| GH1140 | ISO | ISO | Classification and designation for superalloys and high temperature intermetallic materials |
| GH1138 | ISO | ISO | Iron-based superalloy |
| GH1139 | ISO | ISO | Iron-based superalloy |
| GH1167 | ISO | ISO | Iron-based superalloy |
| SUH 11M | ISO | ISO | Engine poppet valve information report |
| 03X18H11 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 06X18H11 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 08X16H11M3 | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| 08X16H11M3T | ISO | ISO | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
| SUH11 | ISO | ISO | CNS standard heat resistant steel bar steel grade and chemical composition |
| ISO H11 | ISO | ISO | Stainless steels - Chemical composition |
| H11 | ISO | ISO | Hot-Work Tool Steel |
| H11 | ISO | ISO | Hot-Work Tool Steel |
| Incoloy 800 | ISO | ISO | Equipment used in the manufacture of resistance to stress corrosion cracking |
| X19CrMoNbVN11-1,1.4913 | ISO | ISO | Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications |
Relevant products
ISO H11 Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| Incoloy800 round bar | Φ115*1400 | Round Bar | Kgs | 169 | Hot-Rolled+Annealed+black | Enquiry |