H13 Enquiry | Print this page
SAE H13 Details
SAE H13 Standard Download
Category | Type | Grade | Designations |
---|---|---|---|
Grades | Tool Die Steels | H13 | USA - SAE , |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | 0.30 | 0.40 | ||
Si | 0.80 | 1.20 | ||
Mn | 0.20 | 0.40 | ||
Cr | 4.75 | 5.50 | ||
Mo | 1.25 | 1.75 | ||
V | 0.80 | 1.20 | ||
W | - | - |
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
413 (≥) | 747 (≥) | 21 | 43 | 34 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
981 (≥) | 277 (≥) | 41 | 12 | 31 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 214 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
428 | 661 | 917 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 564 S13800 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 S13800 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 S13800 | SAE | USA | Age-Hardening Stainless Steel Forgings |
S13800 | AISI | USA | Precipitation Hardenable Chromium Nickel Aluminum Molybdenum Stainless Steel |
SA-564 S13800 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 S13800 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 S13800 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
A 564 XM-13 | SAE | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
A 693 Type XM-13 | SAE | USA | Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
A 705 XM-13 | SAE | USA | Age-Hardening Stainless Steel Forgings |
A 959 Type XM-13 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
F 899 Type XM-13 | SAE | USA | Standard Specification for Wrought Stainless Steels for Surgical Instruments |
SA-564 XM-13 | AMS | USA | Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes |
SA-693 Type XM-13 | AMS | USA | Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
SA-705 Type XM-13 | AMS | USA | Specification for Age-Hardening Stainless Steel Forgings |
PH 13-8Mo | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
PH13-8Mo, 1.4534, Alloy 13-8 | ASTM | USA | Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted |
20X23H13 | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
08X16H13M2Б | GOST | Russia | Russia GOCT standard stainless steel and heat resistant steel steel grade and chemical composition |
X45Cr13 | DIN | Germany | Corrosion-resistant high-temperature steel |
Relevant products
H13 Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
H13 Tool Steel | 50x710xL | Flat or Square bar | PCS | 4 | Forged+Annealed+black | Enquiry |
1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List | Dia.182mm - Dia.510mm | Round Bar | Tons | 120 | Forged+Annealed+black | Enquiry |
PH13-8Mo Forgings | Select | 0 | Select | Enquiry | ||
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry |