SA-479 S21800 Enquiry | Print this page
AMS SA-479 S21800 Details
AMS SA-479 S21800 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SA-479 S21800 | Austenite | USA - AMS , SA-479/SA-479M - Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.10 | ||
Mn | 7.00 | 9.00 | ||
Si | 3.50 | 4.50 | ||
P | - | 0.04 | ||
S | - | 0.03 | ||
Cr | 16.00 | 18.00 | ||
Ni | 8.00 | 9.00 | ||
Mo | - | - | ||
N | 0.08 | 0.18 |
Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
737 (≥) | 535 (≥) | 11 | 13 | 12 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 133 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
245 (≥) | 451 (≥) | 33 | 21 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 114 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
356 | 389 | 277 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 240 S20910 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 249 S20910 | SAE | USA | Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
A 269 S20910 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 276 S20910 | SAE | USA | Stainless Steel Bars and Shapes |
A 314 S20910 | SAE | USA | Stainless Steel Billets and Bars for Forging |
A 580 S20910 | SAE | USA | Stainless Steel Wire |
A 813 S20910 | SAE | USA | Single- or Double-Welded Austenitic Stainless Steel Pipe |
A 814 S20910 | SAE | USA | Cold-Worked Welded Austenitic Stainless Steel Pipe |
A 965 S20910 | SAE | USA | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
F 1314 S20910 | SAE | USA | Standard Specification for Wrought Nitrogen Strengthened 22 Chromium - 13 Nickel - 5 Manganese - 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910) |
F 2181 S20910 | SAE | USA | Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants |
F 621 S20910 | SAE | USA | Standard Specification for Stainless Steel Forgings for Surgical Implants |
S20910 | AISI | USA | Austenitic Chromium Nickel Manganese Molybdenum Stainless Steel |
SA-240 S20910 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-403 S20910 | AMS | USA | Specification for Wrought Austenitic Stainless Steel Piping Fittings |
SA-813 S20910 | AMS | USA | Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe |
SA-814 S20910 | AMS | USA | Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe |
SA-965 S20910 | AMS | USA | Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
A 240 S21800 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 276 S21800 | SAE | USA | Stainless Steel Bars and Shapes |
Relevant products
-
SKD-11 Cold working die steel
-
X165CrMoV12 Cold working die steel
-
GH 3536 Sheet
-
L605 Round Bar Stock
-
Inconel601 round bar
-
Inconel600 round bar
-
K93600\1.3912\Invar36\4J36 rod coil strip wire
-
GH 3536 Sheet
-
GH 605
-
S31608/316/S31600/1.4401 Tube
-
S31603/316L/S31600/1.4404 Tube
-
Monel400/N04400/2.436/Monel 400(SMC) Tube
-
1.4605 COIL Strip Sheet
-
GH 3536 Sheet
-
1.4980/A286/660/1.2779
-
UNS K30960 Bright Round Bar
-
Stainless Steel 446(1.4749, X18CrN28, UNS S44600) Tube Pipe
-
Alloy 59 (2.4605) Tubes Pipe
-
D2(Cr12Mo1V1) Hot Rolled Plate
SA-479 S21800 Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry |