ГОСТ 6ΧCEnquiry|Print this page
Category | Type | Steel grade | Standard | Country |
---|---|---|---|---|
Grades | Special Alloy | 6ΧC | ГОСТ | Russia |
Chemical composition%of the ladle analysis of grade6ΧC
C(%) | Si(%) | Mn(%) | P(%) | S(%) | Cr(%) | Ni(%) | Mo(%) | V(%) | W(%) | Cu(%) | Ti(%) |
---|---|---|---|---|---|---|---|---|---|---|---|
0.60-0.70 | 0.60-1.00 | 0.15-0.40 | ≤0.030 | ≤0.030 | 1.00-1.30 | ≤0.35 | ≤0.20 | ≤0.15 | ≤0.20 | ≤0.30 | 0.03 |
Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
842(≥) | 658(≥) | 24 | 21 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 222 |
Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
---|---|---|---|---|---|---|---|
491(≥) | 945(≥) | 11 | 13 | 21 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 221 | |
Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
138 | 878 | 867 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
1Cr17Mn6Ni5N | ГОСТ | Russia | Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc |
1026 | ГОСТ | Russia | Nonresulfurized carbon steels |
G10260 | ГОСТ | Russia | This grade is a carbon steel composition applicable only to structural shapes (sections), plates, strip, sheets, and welded tubing. |
F10006 | ГОСТ | Russia | Used in the products of the automobile, truck, tractor, and allied industries |
0Cr18Ni16Mo5 | ГОСТ | Russia | Stainless steel bars |
0Cr26Ni5Mo2 | ГОСТ | Russia | Seamless stainless steel tubes for boiler and heat exchanger |
3Cr16 | ГОСТ | Russia | Cold rolled stainless steel sheets and plates |
0Cr17Ni7Al | ГОСТ | Russia | Heat-resisting steel sheets and plates |
1Cr16Ni35 | ГОСТ | Russia | Heat-resisting steel sheets and plates |
0Cr17Ni7Al | ГОСТ | Russia | Heat-resisting steel sheets and plates |
GH1016 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH2036 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH2136 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH4169 | ГОСТ | Russia | Classification and designation for superalloys and high temperature intermetallic materials |
GH1167 | ГОСТ | Russia | Iron-based superalloy |
GH4146 | ГОСТ | Russia | Nickel-base superalloy |
GH4698 | ГОСТ | Russia | Nickel-base superalloy |
GH4761 | ГОСТ | Russia | Nickel-base superalloy |
S20161 | ГОСТ | Russia | Austenitic Chromium Manganese Nickel Silicon Stainless Steel |
S21460 | ГОСТ | Russia | Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
Relevant products
SKD-11 Cold working die steel
X165CrMoV12 Cold working die steel
1.4980 Round Bar
D6AC Forging Hollow Bar
GH 3536 Sheet
UNS N10276 Coil
X65Cr13 profile steel
IncoloyA-286 / GH 2132
S66286 round bar
L605 Round Bar Stock
Inconel625 round bar
Inconel601 round bar
HastelloyC-276 round bar
Inconel600 round bar
17-7PH / 631 COIL Strip Sheet
K93600\1.3912\Invar36\4J36 rod coil strip wire
NO8020/No8031/N08367/NO8810/NO8825 Forging
GH 3536 Sheet
Inconel 625 Bar
GH 605
6ΧC Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
17-4PH Coil Stock | 0.08*200mm | Coil or Strip | Kgs | 1623 | Cold-Rolled+Annealed | Enquiry |
17-4PH Round Bar | Φ5-300mm*L | Round Bar | Kgs | 46958 | Hot-Rolled+Annealed+black | Enquiry |
17-4PH plate | 8-45*1200*3000mm | Plate or Sheet | Tons | 4.9 | Hot-Rolled+Annealed+black | Enquiry |
Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
IncoloyA-286 / GH 2132 Stock | Φ8-65mm*L | Round Bar | Kgs | 489 | Hot-Rolled+Annealed+black | Enquiry |
17-7PH / 631 Coil & Strip, Sheet Stock | 0.3-3.0*10-180mm | Coil or Strip | Kgs | 1236.22 | Cold-Rolled+Annealed | Enquiry |
UNS K30960(VIM+ESR) Bright Round Bar | Dia.22mm | Round Bar | Kgs | 50 | Hot-Rolled+Annealed+black | Enquiry |
SA-437 Grade B4B/SUS 616 /422 Forged Bar | Dia.160xL | Round Bar | Kgs | 2120 | Forged+QT | Enquiry |
Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry | ||
1.2367 ESR Forged Round Bar stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
1Cr11Ni2W2MoV,961,13Cr11Ni2W2MoV Sheet | Select | 0 | Select | Enquiry | ||
B16 Round Bar Stock | Select | 0 | Select | Enquiry | ||
Cr8 flat bar | 12*355*L | Flat or Square bar | Kgs | 3965 | Forged+Annealed+black | Enquiry |