JIS SUS309STPEnquiry|Print this page
| Category | Type | Steel grade | Standard | Country |
|---|---|---|---|---|
| Grades | Special Alloy | SUS309STP | JIS | Japan |
Chemical composition%of the ladle analysis of gradeSUS309STP
| C(％) | Si(％) | Mn(％) | P(％) | S(％) | Cr(％) | Ni(％) |
|---|---|---|---|---|---|---|
| Max 0.08 | Max 1.00 | Max 2.00 | Max 0.04 | Max 0.03 | 2.00-24.00 | 12.00-15.00 |
| Proof strength Rp0.2(MPa) | Tensile strength Rm(MPa) | Impact energy KV(J) | Elongation at fracture A(%) | Reduction in cross section on fracture Z(%) | As-Heat-Treated Condition | Brinell hardness(HBW) |
|---|---|---|---|---|---|---|
| 856(≥) | 537(≥) | 13 | 12 | 11 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 222 |
| Property | Density kg/dm3 | Temperature T °C/F | Specific heat J/kgK | Thermal conductivity W/mK | Electric resistance µΩ·cm | Modulus of elasticity kN/mm2 | Expansion rate |
|---|---|---|---|---|---|---|---|
| 135(≥) | 437(≥) | 23 | 44 | 43 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 332 | |
| Temp. °C/°F | Creep strain limit (10000h) (Rp1,0)N/mm2 | Creep rupture strength (10000h) (Rp1,0)N/mm2 | |||||
| 161 | 581 | 243 |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
| Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
| Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
| Grade | Standard | Country | Application |
|---|---|---|---|
| 1Cr18Ni12 | JIS | Japan | Compared with 0 cr19ni9, processing low hardenability. Used for spinning processing, special drawing, cold heading |
| 0Cr17Ni12Mo2 | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| 1Cr18Ni12Mo2Ti | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| 0Cr18Ni12Mo2Ti | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| F10012 | JIS | Japan | Used in the products of the automobile, truck, tractor, and allied industries. Diesel engine castings, liners, cylinders, and pistons. |
| 0Cr17Ni12Mo2N | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| 0Cr18Ni12Mo2Cu2 | JIS | Japan | 0Cr18Ni12Mo2Cu2 stainless steel corrosion resistance, resistance to corrosion resistance is better than 0Cr17Ni12Mo2. 0Cr18Ni12Mo2Cu2 stainless steel used in the sulphuric acid resistant material. |
| 1Cr18Ni12Mo3Ti | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| 0Cr18Ni12Mo3Ti | JIS | Japan | Seamless stainless steel tubes for boiler and heat exchanger |
| 00Cr12 | JIS | Japan | Heat-resisting steel sheets and plates |
| 1Cr12 | JIS | Japan | Heat-resisting steel sheets and plates |
| 2Cr21Ni12N | JIS | Japan | Heat-resisting steel bars |
| 00Cr12 | JIS | Japan | Heat-resisting steel sheets and plates |
| 1Cr12Mo | JIS | Japan | Heat-resisting steel bars |
| 2Cr12MoVNbN | JIS | Japan | Heat-resisting steel bars |
| 1Cr12WMoV | JIS | Japan | Heat-resisting steel bars |
| 2Cr12NiMoWV | JIS | Japan | Heat-resisting steel bars |
| GH3128 | JIS | Japan | Classification and designation for superalloys and high temperature intermetallic materials |
| 1.4923 | JIS | Japan | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
| X 22 CrMoV 12-1 | JIS | Japan | DIN 17240 (1976) Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications; Replaced by: DIN EN 10269:1999 |
Relevant products
SKD-11 Cold working die steel
X165CrMoV12 Cold working die steel
T30402/X155CrVMo121 Die Steel Sheet
K93600\1.3912\Invar36\4J36 rod coil strip wire
1.4923 / X22CrMoV12-1 Round Bar
65Mn4 / 1.1233 Coil Strip
1.4923(X22CrMoV12-1) Stainless Steel Sheets/Strip/Plate/Coil
Air 9160C 30CD12 Round Bar
1.4923(X22CrMoV12-1) Hexagon socket head cap screws - DIN 912
1.4120 / X20CrMo13 Stainless Steel Coil
SKD11(D2, 1.2379, X153CrMo12) Cold Work Tool Steel
X20CrMo13 / 1.4120 Martensitic Stainless Steel Strip, Coil Cold Rolled Annealed
Cold Rolled 1.4122 / X39CrMo17-1 Martensitic Stainless Steel sheet, strip, coil
AISI E2512(SAE J1249) DIN 1.5681 Round bar
X105CrMo17 Extruded Pipe
1Cr12Ni3Mo2VN/J2 Hot Forged Bar
Z12CNDV12-03/KT5312AS6 Forged Bar
X20CrMoV12-1(1.4923)+NT EN10216-2 Tube
D2(Cr12Mo1V1) Hot Rolled Plate
X12CrNiWTiB16-13, 1.4962 Flat Bar
SUS309STP Steel Stock
| Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
|---|---|---|---|---|---|---|
| Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
| 1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
| Incoloy800 round bar | Φ115*1400 | Round Bar | Kgs | 169 | Hot-Rolled+Annealed+black | Enquiry |
| Stainless Steel 422 / Alloy 422 AMS 5655 UNS S42200/616/B4B Round Bar Stock | Select | 0 | Select | Enquiry | ||
| 15-5PH Forgrd Flat Bar | Select | 0 | Select | Enquiry |