SA-479 S30600 Enquiry | Print this page
AMS SA-479 S30600 Details
AMS SA-479 S30600 Standard Download
Category | Type | Grade | Microstructure | Designations |
---|---|---|---|---|
Grades | Stainless Steels | SA-479 S30600 | Austenite | USA - AMS , SA-479/SA-479M - Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.018 | ||
Mn | - | 2.00 | ||
Si | 3.70 | 4.30 | ||
P | - | 0.02 | ||
S | - | 0.02 | ||
Cr | 17.00 | 18.50 | ||
Ni | 14.00 | 15.50 | ||
Mo | - | 0.20 |
Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
647 (≥) | 392 (≥) | 14 | 41 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 444 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
686 (≥) | 976 (≥) | 11 | 12 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 333 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
133 | 735 | 424 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
Grade | Standard | Country | Application |
---|---|---|---|
A 167 S30600 | SAE | USA | Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip |
A 240 S30600 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 269 S30600 | SAE | USA | Seamless and Welded Austenitic Stainless Steel Tubing for General Service |
A 312 S30600 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A 358 S30600 | SAE | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications |
A 479 S30600 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
A 943 S30600 | SAE | USA | Spray-Formed Seamless Austenitic Stainless Steel Pipes |
A 959 S30600 | SAE | USA | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels |
A 965 S30600 | SAE | USA | Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
S30600 | AISI | USA | Austenitic Chromium Nickel Stainless Steel |
SA-240 S30600 | AMS | USA | Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
SA-312 S30600 | AMS | USA | Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
SA-358 S30600 | AMS | USA | Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service |
SA-479 S30600 | AMS | USA | Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
SA-965 S30600 | AMS | USA | Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts |
A 213 N08925 | SAE | USA | Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
A 240 N08925 | SAE | USA | Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
A 276 N08925 | SAE | USA | Stainless Steel Bars and Shapes |
A 312 N08925 | SAE | USA | Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
A 479 N08925 | SAE | USA | Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
Relevant products
-
A387 F5 / Grade 5 Coil / Sheet
-
X65Cr13 profile steel
-
IncoloyA-286 / GH 2132
-
L605 Round Bar Stock
-
Inconel718 round bar
-
Inconel625 round bar
-
waspaloy round bar
-
HastelloyC-22 round bar
-
Inconel601 round bar
-
Monel400 round bar
-
Incoloy800 round bar
-
HastelloyC-276 round bar
-
Incoloy825 round bar
-
Inconel600 round bar
-
Inconel825 round bar
-
Incoloy800 round bar
-
Inconel 625 Bar
-
S30403/304L/S30403/1.4307 Tube
-
S30453/304LN/1-4311 Tube
-
S31603/316L/S31600/1.4404 Tube
SA-479 S30600 Steel Stock
Steel grade | Dimension | Shape | Unit | Quantity | Delivery state | Query |
---|---|---|---|---|---|---|
IncoloyA-286 / GH 2132 Stock | Φ8-65mm*L | Round Bar | Kgs | 489 | Hot-Rolled+Annealed+black | Enquiry |
Incoloy800 round bar | Φ115*1400 | Round Bar | Kgs | 169 | Hot-Rolled+Annealed+black | Enquiry |
1.4882 strip/sheet/plate stock | 3.5x200x1000-2000mm | Coil or Strip | Kgs | 200 | Cold-Rolled+Annealed | Enquiry |
1.2714 Hot-Work Mould Steel Flat Bar Stock(2019-09-03) | Select | 0 | Select | Enquiry | ||
1.2714 Stock list 2020-06-15 | Select | 0 | Select | Enquiry | ||
1.2714 QT Bar Stock List 2020-06-15 | Select | 0 | Select | Enquiry | ||
0Cr13Ni8Mo2Al, PH13-8Mo, 13-8Mo, XM-13 round bar stock | Select | 0 | Select | Enquiry | ||
Cr8 flat bar | 12*355*L | Flat or Square bar | Kgs | 3965 | Forged+Annealed+black | Enquiry |
Cr12MoV | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 12.38 | Hot-Rolled+Annealed+black | Enquiry |
1.2601 | 12-160(T)*310-610(W)*L | Plate or Sheet | Tons | 11.22 | Hot-Rolled+Annealed+black | Enquiry |
X22CrMoV12-1 / 1.4923 | Φ17mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
X22CrMoV12-1 / 1.4923 | Φ30mm | Round Bar | Kgs | 300 | Hot-Rolled+Annealed+black | Enquiry |
T45Cr5Si3 Round Bar | Dia.40mm | Round Bar | Kgs | 500 | Hot-Rolled+Annealed+black | Enquiry |
1.2344(H13/X40CrMoV5-1/Z40CDV5) Stock List | Dia.182mm - Dia.510mm | Round Bar | Tons | 120 | Forged+Annealed+black | Enquiry |